| Steel > 0.25% C | Steel < 0.25% C | Stainless steel |
|---|---|---|
| 0,4 - 2,5 mm 0.016 - 0.098 " | 0,4 - 2,5 mm 0.016 - 0.098 " | 0,4 - 1,8 mm 0.016 - 0.071 " |
| Copper | Brass | Aluminium |
| 0,4 - 2 mm 0.016 - 0.079 " | 0,4 - 2 mm 0.016 - 0.079 " | 0,8 - 2 mm 0.031 - 0.079 " |
| Annealing length | Weight | Nominal capacity in kVA | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
| ||||||||||
| Special features | ||||||||||||
| ||||||||||||
 | Wire cutter, straight For steel Ø 0.4-2.5 mm – 600 N/mm² For steel Ø 0.4-2.0 mm – 1000 N/mm² For steel Ø 0.4-1.5 mm – 1900 N/mm² |
 | Wire cutter left, angled For steel Ø 0.4-2.5 mm – 600 N/mm² For steel Ø 0.4-2.0 mm – 1000 N/mm² For steel Ø 0.4-1.5 mm – 1900 N/mm² |
 | Wire cutter right, angled For steel Ø 0.4-2.5 mm – 600 N/mm² For steel Ø 0.4-2.0 mm – 1000 N/mm² For steel Ø 0.4-1.5 mm – 1900 N/mm² |
 | Cutter for wires up to dia. Ø 4.0 mm with max. 500 N/mm² (punched disk with bores dias. Ø 1.4 mm - 4.5 mm, 8 bores) |
 | Vertical grinding motor 0.25 kW For steel Ø 0.8 – 7.0 mm For non-ferrous metals Ø 0.8 – 6 mm |
 | Double file Hieb 5; E09-Z2-1940 For steel up to 1mm - 600N/mm² for non-ferrous metal |
 | Double file Hieb 3; E09-Z1-1940 For steel Ø 0.6 – 1.0 mm For non-ferrous metals Ø 0.8 – 1.5 mm |
 | Running gear with 4 wheels Incl. safety bow |
 | Workbench running gear |
 | Workbench running gear With built-in automatic annealing device |
 | Power Pack (Battery pack – including workbench running gear) Voltage range 175-260V, 40-70Hz. |
 | Machine lamp (Only 50Hz) |
 | LED magnifier lamp large - 0550-0010-23 2x resolution |
 | Electronic controller V30 |
